ICarsoft LR V2.0 LAND ROVER JAGUAR ABS SRS AIRBAG ENGINE DIAGNOSTIC SCANNER TOOL

ICarsoft LR V2.0 LAND ROVER JAGUAR ABS SRS AIRBAG ENGINE DIAGNOSTIC SCANNER TOOL
ICarsoft LR V2.0 LAND ROVER JAGUAR ABS SRS AIRBAG ENGINE DIAGNOSTIC SCANNER TOOL
ICarsoft LR V2.0 LAND ROVER JAGUAR ABS SRS AIRBAG ENGINE DIAGNOSTIC SCANNER TOOL
ICarsoft LR V2.0 LAND ROVER JAGUAR ABS SRS AIRBAG ENGINE DIAGNOSTIC SCANNER TOOL
ICarsoft LR V2.0 LAND ROVER JAGUAR ABS SRS AIRBAG ENGINE DIAGNOSTIC SCANNER TOOL
ICarsoft LR V2.0 LAND ROVER JAGUAR ABS SRS AIRBAG ENGINE DIAGNOSTIC SCANNER TOOL
ICarsoft LR V2.0 LAND ROVER JAGUAR ABS SRS AIRBAG ENGINE DIAGNOSTIC SCANNER TOOL
ICarsoft LR V2.0 LAND ROVER JAGUAR ABS SRS AIRBAG ENGINE DIAGNOSTIC SCANNER TOOL
ICarsoft LR V2.0 LAND ROVER JAGUAR ABS SRS AIRBAG ENGINE DIAGNOSTIC SCANNER TOOL
ICarsoft LR V2.0 LAND ROVER JAGUAR ABS SRS AIRBAG ENGINE DIAGNOSTIC SCANNER TOOL
ICarsoft LR V2.0 LAND ROVER JAGUAR ABS SRS AIRBAG ENGINE DIAGNOSTIC SCANNER TOOL

ICarsoft LR V2.0 LAND ROVER JAGUAR ABS SRS AIRBAG ENGINE DIAGNOSTIC SCANNER TOOL
ICarsoft LR V2.0 Pro Multi-System Scanner Tool. The iCarsoft LR V2.0 is a professional fault diagnosis tool designed specifically for LAND ROVER/JAGUAR vehicles. It is an easy to use, stand alone unit that will have you scanning your vehicle within minutes. Simply, plug it into the OBD II port and the device will boot up with step-by-step instructions. This scanner has a large, easy to read 4 inch color display accompanied by a user friendly interface that requires no additional software. As an added bonus, the scanner is equipped with full OBDII capabilities that allows you to scan all engine readings and related trouble codes (check engine light) on ANY vehicle make/model 1996 and newer. This tool is the newest version in the iCarsoft line of products and replaces the LRII. Features for the iCarsoft LR V2.0 include the following. Oil/Service/Brake Service Reset Function. On vehicles where a manual reset is required, the tool will guide you through the full process step-by-step. Battery Management System (BMS). Registers new battery to the BMS during battery replacement. Brake Pad / Shoe changes on vehicles equipped with EPB’s (Electronic Parking Brakes) MUST be carried out using a Diagnostic Tool to correctly re-calibrate. The iCarsoft 2nd Generation Tools offer you that capability on supported models. De-activate to Service Position – Replace – Re-activate. After cleaning or replacing the Electronic Throttle Body (ECTS), adaptation must be carried out (also the case if the negative terminal of the battery has been disconnected or when the Engine Control Unit has been replaced). The iCarsoft 2nd Generation Tools will perform Electronic Throttle Body adaptations on supported vehicles. The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned. The signal is mainly used by the ABS System as part of it’s stability control function but also by other systems such as ride level control and adaptive lighting. A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly. If the Steering Angle Sensor (SAS) needs to be changed, many vehicle’s require the new sensor to be calibrated. The iCarsoft 2nd Generation Tool will allow you to carry out steering angle re-calibration on supported models. DPF Regeneration or Replacement. Carry out a forced Diesel Particulate Filter (DPF) Regeneration on supported vehicles – this MUST be done by trained personnel. Required when the DPF filter blockage reaches levels where passive or active regeneration is unable to burn off the excess soot. The iCarsoft 2nd Generation Tool is also capable of adapting a new DPF Filter where supported. For the following Land Rovers. 1997 – 2013 FREELANDER & FREELANDER 2 (LR2) 1997 – 2004 and 2007 – 2012 DEFENDER 1999 – 2016 DISCOVERY 2, DISCOVERY 3 (LR3), DISCOVERY 4 (LR4) 2005 – 2016 RANGE ROVER SPORT (Supercharged and HSE) 1999 – 2016 RANGE ROVER (Supercharged and HSE) 2012 – 2017 EVOQUE. For the following Jaguars. 1994 – 2015 XJ TYPE. 2008 – 2015 XF TYPE 1997 – 2015 XK TYPE 2014 – 2015 F TYPE 1999 – 2008 S TYPE 2001 – 2009 X TYPE. Mainly include: CANBUS, ISO9141, KWP2000, and J1850 etc. It enables technicians to accurately diagnose complex problems. UP BUTTON–Moves cursor up for selection. LEFT BUTTON–Moves cursor up for selection. RIGHT BUTTON–Moves cursor down for selection. DOWN BUTTON–Moves cursor down for seiection. ENTER BUTTON–Confirms a selection(or action). From a menu list. HELP BUTTON–Shows help information for test. Results or user operation. F1 FUNCTION BUTTON–In case of special use. F2 FUNCTION BUTTON–In case of special use. OBDII CONNECTOR–Connects the scan tool to. The vehicle’s Data Link Connector via OBDII Cable. STORAGE CARD SLOT–Holds the system of the. Data Cable CONNECTOR–Connects the scan tool. For power supply and update the software if needed. ICarsoft LR V2.0 can do it all-reads and clears trouble codes on most of the systems. Such as engine, transmission, ABS and airbag etc. Support OBDII/EOBD Ten Modes of Operation. Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC. Easy To Use With Silicone Keys. Oil Light/Service Reset: Support service lamp reset. Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the. EPB system for replacement and initialization. Battery Management System (BMS), registers new battery to the BMS while battery replacement. Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regen-eration. Process while DPF blockage and turn off the DPF indicator. Electronic Throttle Control system (ETC) relearns the throttle va value while clear or. Replaces the throttle valve. SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to. Straight ahead, or recalibrates SAS while steering part replacement. ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced. Injector coding, relearn the injector control parameter while the injector renewed or replaced. The Print Data function allows you printing out diagnostic data recorded by the scan. Tool or customized test reports. Battery test allows you getting the voltage of battery with OBD port by the scan tool. When the engine starts. DTC Library to lookup when user is operating this tool. Multi-language: English, German, Dutch, Spanish, French. Diagnose Single Brand of most Models (OBDII-16DLC). Full System Diagnosis Support Oil Service Reset. Electronic Parking Brake (EPB) system maintenance. Diesel Particulate Filter (DPF) Regeneration Control System. Electronic Throttle Control System (ETC). Steering Angle Sensor (SAS) Calibration. ABS Bleeding(some vehicles do not enjoy this function). Injector Coding(some vehicles do not enjoy this function). Read &Clear DTC Read Live Data. Support Battery Test Support Data Review and Print. Full Speed Upgrade via PC 4.0 TFT LCD, 480320 Pixels. I/M Readiness — I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing. Freeze Frame — When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault. O2 Sensor Test — This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer. On-Board Monitoring — This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems. Evap System Test — The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test. Vehicle Information — The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle. Turn off Check Engine Light (MIL), clear cod-es and reset monitors 12. Read live PCM DataStream 13. Support CAN (Controller Area Network) and all other 14. Multilingual menu and DTC definitions English, Spanish, and German, etc. Read pending DTCs 16. Read permanent DTCs 17. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM. Works on most of 2001 and later OBDII compliant PETROL European vehicles 20. Works on most of 2004 and later OBDII compliant DIESEL European vehicles 21. Works on most of 1996 and later OBDII compliant US and Asian vehicles 22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings. Comprehensive Help, Including OBD Parameter, Mode Explanations & More. The item “ICarsoft LR V2.0 LAND ROVER JAGUAR ABS SRS AIRBAG ENGINE DIAGNOSTIC SCANNER TOOL” is in sale since Wednesday, May 15, 2019. This item is in the category “eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Code Readers & Scanners”. The seller is “quickshipautoparts” and is located in Portland, Oregon. This item can be shipped worldwide.
  • Supported System: Transmission
  • OBD Interface: EOBD
  • Features: Backlit Display
  • Manufacturer Part Number: LR V2.0
  • Vehicle Type: Passenger Vehicle
  • Accessories: Adapter Cable
  • Brand: iCarsoft
  • Warranty: 1 Year

ICarsoft LR V2.0 LAND ROVER JAGUAR ABS SRS AIRBAG ENGINE DIAGNOSTIC SCANNER TOOL